Welcome to 3D CAD Resources -You are at the right place if you need Free online tips, tricks, tutorials for
beginners covering the following applications - Catia, AutoCAD, SolidWorks, Unigraphics, etc.,
2) Select Chamfer tool from toolbar as shown in Figure 2.
Figure 2.
3) When Chamfer dialogue box appears select three corners as shown in Figure 3 and later
enter 8 mm as the offset value as shown in Figure 4 and click ok.
Figure 3.
Figure 4.
4) The resultant part with chamfer created on the edges, would be as shown in figure 5.
