Welcome to 3D CAD Resources -You are at the right place if you need Free online tips, tricks, tutorials for
beginners covering the following applications - Catia, AutoCAD, SolidWorks, Unigraphics, etc.,
This illustrated step by step tutorials shows you how to create taper on a face of the existing solid using draft tool using neutral plane as draft type.
2) Select Draft tool from toolbar or from Insert menu as shown in figure 2 and
3 respectively.
Figure 2.
Figure 3.
3) In draft PropertyManager let us select Neutral Plane as type of draft and 30 degrees for
"Draft Angle" as shown in figure 4.
Figure 4.
4) Let us select face 1 as neutral plane and face 2 and 3 as the faces which are to be drafted as shown in
figure 5.
Figure 4.
5) Now Click in draft PropertyManager and the
resultant solid part with taper created between two faces using draft tool would be as shown in
figure 6.
in draft PropertyManager and the
resultant solid part with taper created between two faces using draft tool would be as shown in
figure 6.
