Welcome to 3D CAD Resources -You are at the right place if you need Free online tips, tricks, tutorials for
beginners covering the following applications - Catia, AutoCAD, SolidWorks, Unigraphics, etc.,
2) Now add constraint to the sketch with general dimension then edit the dimension as per your requirement as shown in Figure 2
. After finished click on button to exit sketcher work bench.
3) Then go to isometric view and then click on button to which opens up "Revolve"
property dialog box as shown in Figure 3.. Click on "Axis" button and set the
revolve "Extents" to "Full" as shown in below image.
Figure 3.
4) The resultant part would be as shown in Figure 4.
Figure 4.
5) Now click on button in "Part Feature" panel. When
"Chamfer" dialog box appears select bottom edge of the part and set "Distance" to 0.08 inch as
shown in Figure 5.
button to exit sketcher work bench.
button to which opens up "Revolve"
property dialog box as shown in Figure 3.. Click on "Axis" button and set the
revolve "Extents" to "Full" as shown in below image.
button in "Part Feature" panel. When
"Chamfer" dialog box appears select bottom edge of the part and set "Distance" to 0.08 inch as
shown in Figure 5.
